+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    The Greek Spartan's Avatar
    Join Date
    Jan 2012
    Location
    STL-MO
    Posts
    44

    Hub on a 1995 F-150



    I cant get the wheel bearing lock nut out, any ideas? I took the C-Clip out.
    Thanks

  2. #2
    Do you have the special socket that goes on it?

    2012 Mustang GT Premium 6-speed

  3. #3
    The Greek Spartan's Avatar
    Join Date
    Jan 2012
    Location
    STL-MO
    Posts
    44
    I spun it free with the socket. I'm having problems pull it over the splines. We had the truck in 4WD and heard a load snap nosie. This hub is F'ed up.

  4. #4
    I wish I could remember how we did this on my 96. I had a friend who is a really good ford mechanic with all the special ford tools laying around.

    I remember he used a slide hammer with some kind of special tool to pull something out of there...

    2012 Mustang GT Premium 6-speed

  5. #5
    The Greek Spartan's Avatar
    Join Date
    Jan 2012
    Location
    STL-MO
    Posts
    44
    Its the washer, its so F'ed up that it wont let the lock nut come out. I'm thinking I'll have to cut it out some how or cut the rotor to get to it. What fun. Time for more burboun.

  6. #6
    Administrator TDSP's Avatar
    Join Date
    Dec 2011
    Location
    Bronie Town USA
    Posts
    518
    Blue wrench.

    It's time to pay the price for the sins of the Emissary.
    Green Blood and Red will be shed at the hands of the Jem'hadar.
    Let's hope the "Old Man" has something to save us.

  7. #7
    The Greek Spartan's Avatar
    Join Date
    Jan 2012
    Location
    STL-MO
    Posts
    44
    The driver side had no c-clip at all just a bunch of red grease the pass side is just F'ed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts