PDA

View Full Version : Hub on a 1995 F-150



Spartan
02-18-2012, 10:23 PM
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/395774_694983276500_71904546_33910097_142233883_n. jpg

I cant get the wheel bearing lock nut out, any ideas? I took the C-Clip out.
Thanks

cowman
02-18-2012, 11:11 PM
Do you have the special socket that goes on it?

Spartan
02-19-2012, 12:12 AM
I spun it free with the socket. I'm having problems pull it over the splines. We had the truck in 4WD and heard a load snap nosie. This hub is F'ed up. :facepalm:

cowman
02-19-2012, 12:19 AM
I wish I could remember how we did this on my 96. I had a friend who is a really good ford mechanic with all the special ford tools laying around.

I remember he used a slide hammer with some kind of special tool to pull something out of there...

Spartan
02-19-2012, 02:14 AM
Its the washer, its so F'ed up that it wont let the lock nut come out. I'm thinking I'll have to cut it out some how or cut the rotor to get to it. What fun. Time for more burboun. :arghfap:

TDSP
02-19-2012, 03:13 AM
Blue wrench.

Spartan
02-19-2012, 03:38 AM
The driver side had no c-clip at all just a bunch of red grease the pass side is just F'ed.